Vista normal Vista MARC Vista ISBD

Piping handbook [electronic resource] / [edited by] Mohinder L. Nayyar.

Colaborador(es): Nayyar, Mohinder L.
Tipo de material: TextoTextoSeries McGraw-Hill's AccessEngineering: Editor: New York : McGraw-Hill, [2000]Edición: 7th ed.Descripción: 1 electronic text : ill.ISBN: 9780070471061.Tema(s): Pipe | Pipe-fitting | Piping | Pipe -- Materials | Piping -- Standards | Pipe joints | Joints (Engineering) | Pipe, Concrete | Valves | Piping -- Design and construction | Strains and stresses | Pipe supports | Insulation (Heat) | Pipe -- Fluid dynamics | Water-pipes -- Linings | Water-pipes -- Corrosion | Double wall piping | Water-pipes -- Testing | Water leakage | Water-pipes | Pipe -- Testing | Fire protection engineering | Petroleum pipelines | Gas pipelines | Pipelines | Steam | Low temperature engineering | Refrigeration and refrigerating machinery | Hazardous substances | Slurry pipelines | Water-supply engineering | Sewer-pipe | Storm sewers | Plumbing -- Equipment and supplies | Ash disposal | Compressed air | Vacuum technology | Gas-pipes | Thermoplastics | Pipe, plastic | Glass fibersGénero/Forma: Electronic books. | Internet resources.Clasificación CDD: 621.8/672 Recursos en línea: Subscription required Also issued in print.
Contenidos:
http://www.loc.gov/catdir/toc/mh021/00265340.html
Piping fundamentals -- Generic design considerations -- Piping systems -- Nonmetallic piping.
    Valoración media: 0.0 (0 votos)
Tipo de ítem Ubicación actual Colección Signatura Estado Fecha de vencimiento Código de barras
Recurso Electrónico Recurso Electrónico Biblioteca Fundación Área Andina - Medellín
Colección digital Disponible
Recurso Electrónico Recurso Electrónico Biblioteca Fundación Área Andina - Pereira
Colección digital Disponible
Recurso Electrónico Recurso Electrónico Biblioteca Fundación Área Andina - Valledupar
Colección digital Disponible
Recurso Electrónico Recurso Electrónico Biblioteca General Fundación Área Andina - Bogotá
Colección digital Disponible

Print version c2000.

Includes bibliographical references.

http://www.loc.gov/catdir/toc/mh021/00265340.html

Pt. A. Piping fundamentals -- pt. B. Generic design considerations -- pt. C. Piping systems -- pt. D. Nonmetallic piping.

A. HONORS LIST -- CONTRIBUTORS -- REVIEWERS -- TECHNICAL AND ADMINISTRATIVE SUPPORT -- B. PREFACE -- ABOUT THE EDITOR IN CHIEF -- C. HOW TO USE THIS HANDBOOK -- A. Part A: PIPING FUNDAMENTALS -- A1. INTRODUCTION TO PIPING -- INTRODUCTION -- PIPING -- PIPING CLASSIFICATION -- OTHER PIPE RATINGS -- GENERAL DEFINITIONS -- FORCES, MOMENTS, AND EQUILIBRIUM -- WORK, POWER, AND ENERGY -- HEAT AND TEMPERATURE -- LENGTHS, AREAS, SURFACES, AND VOLUMES -- ACRONYMS AND ABBREVIATIONS -- USEFUL TABLES -- UNITS AND CONVERSION TABLES -- REFERENCES -- A2. PIPING COMPONENTS -- PIPE AND TUBE PRODUCTS -- TRAPS -- STRAINERS -- EXPANSION JOINTS -- THREADED JOINTS -- WELDED AND BRAZED JOINTS -- JOINING DUCTILE OR CAST-IRON PIPE -- CONCRETE, CEMENT, AND CEMENT-LINED PIPE -- A3. PIPING MATERIALS -- MATERIAL PROPERTIES OF PIPING MATERIALS -- METALLIC MATERIALS -- PHYSICAL METALLURGY OF STEEL -- ALLOYING OF STEEL -- CLASSIFICATION OF STEELS -- STEEL HEAT-TREATING PRACTICES -- DEGRADATION OF MATERIALS IN SERVICE -- MATERIAL SPECIFICATIONS -- REFERENCES -- A4. PIPING CODES AND STANDARDS -- AMERICAN SOCIETY OF MECHANICAL ENGINEERS -- ASME BOILER AND PRESSURE VESSEL CODE -- ASME SECTION I: POWER BOILERS -- ASME SECTION II: MATERIALS -- ASME SECTION III: NUCLEAR POWER PLANT COMPONENTS -- ASME SECTION V: NONDESTRUCTIVE EXAMINATION -- ASME SECTION VIII: PRESSURE VESSELS -- ASME SECTION IX: WELDING AND BRAZING QUALIFICATIONS -- ASME SECTION XI: RULES FOR IN-SERVICE INSPECTION OF NUCLEAR POWER PLANT COMPONENTS -- ASME B31: CODE FOR PRESSURE PIPING -- ASME B31.1: POWER PIPING CODE -- USAS B31.2: FUEL GAS PIPING -- ASME B31.3: PROCESS PIPING -- ASME B31.4: LIQUID TRANSPORTATION SYSTEMS FOR HYDROCARBONS, LIQUID PETROLEUM GAS, ANHYDROUS AMMONIA, AND ALCOHOLS -- ASME B31.5: REFRIGERATION PIPING -- ASME B31.8: GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS -- ASME B31.9: BUILDING SERVICES PIPING -- ANSI/ASME B31.11: SLURRY TRANSPORTATION PIPING SYSTEMS -- ASME PERFORMANCE TEST CODES -- AMERICAN SOCIETY FOR TESTING AND MATERIALS -- AMERICAN GAS ASSOCIATION -- AMERICAN PETROLEUM INSTITUTE -- AMERICAN WATER WORKS ASSOCIATION -- AMERICAN WELDING SOCIETY -- AIR-CONDITIONING AND REFRIGERATION INSTITUTE -- AMERICAN SOCIETY OF HEATING REFRIGERATING AND AIR-CONDITIONING ENGINEERS -- AMERICAN SOCIETY OF SANITARY ENGINEERS -- AMERICAN SOCIETY OF CIVIL ENGINEERS -- AMERICAN SOCIETY FOR NONDESTRUCTIVE TESTING -- AMERICAN IRON AND STEEL INSTITUTE -- AMERICAN NUCLEAR SOCIETY -- BUILDING OFFICIALS CONFERENCE OF AMERICA -- DUCTILE IRON PIPE RESEARCH ASSOCIATION -- EXPANSION JOINT MANUFACTURERS ASSOCIATION -- FLUID CONTROLS INSTITUTE -- FACTORY MUTUAL ENGINEERING & RESEARCH CORPORATION -- FLUID SEALING ASSOCIATION -- HEAT EXCHANGE INSTITUTE -- HYDRAULIC INSTITUTE -- INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS -- INSTRUMENT SOCIETY OF AMERICA.

MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS INDUSTRY -- NATIONAL FIRE PROTECTION ASSOCIATION -- PIPE FABRICATION INSTITUTE -- PLASTICS PIPE INSTITUTE -- STEEL STRUCTURES PAINTING COUNCIL -- TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION -- UNDERWRITERS LABORATORIES -- FOREIGN CODES AND STANDARDS -- BRITISH STANDARDS AND SPECIFICATIONS -- DIN STANDARDS AND SPECIFICATIONS -- JAPANESE STANDARDS AND SPECIFICATIONS -- ISO STANDARDS AND SPECIFICATIONS -- REFERENCES -- A5. MANUFACTURING OF METALLIC PIPE -- DEVELOPMENT OF COMMERCIAL PIPE-MAKING -- FERROUS PIPE-MAKING PROCESSES -- NONFERROUS PIPE-MAKING PROCESSES -- COMMERCIAL PIPE AND TUBE SIZES -- TUBULAR PRODUCT CLASSIFICATION -- SPECIALTY TUBULAR PRODUCTS -- ENGINEERING SELECTION OF PIPE MANUFACTURING METHODS -- A6. FABRICATION AND INSTALLATION OF PIPING SYSTEMS -- INTRODUCTION -- FABRICATION -- INSTALLATION -- REFERENCES -- A7. BOLTED JOINTS -- INTRODUCTION -- COST OF A LEAK -- THE PROCESS OF JOINT INTEGRITY -- FLANGE JOINT COMPONENTS -- FUNCTION OF GASKETS -- FUNCTION OF BOLTS -- BEHAVIOR OF THE FLANGED JOINT SYSTEM -- GASKET SELECTION -- BOLT SELECTION -- FLANGE STRESS ANALYSIS -- ASSEMBLY CONDITIONS -- BOLT LOAD MONITORING -- MANAGING FLANGE JOINT INTEGRITY -- A8. PRESTRESSED CONCRETE CYLINDER PIPE (PCCP) AND FITTINGS -- INTRODUCTION -- DESCRIPTION -- DESIGN -- MANUFACTURE -- JOINTS -- INSTALLATION -- BIBLIOGRAPHY -- A9. GROOVED AND PRESSFIT PIPING SYSTEMS -- PRESSFIT® -- GROOVED MECHANICAL PIPE JOINTS -- A10. PART 1 SELECTION AND APPLICATION OF VALVES -- INTRODUCTION -- VALVE TERMINOLOGY -- REFERENCE CODES AND STANDARDS -- CLASSIFICATION OF VALVES -- MAJOR VALVE PARTS -- MATERIALS -- VALVE CATEGORIES -- VALVE TYPES -- PRESSURE-RELIEF DEVICES -- ACTUATORS -- SELECTION AND APPLICATION GUIDELINES -- A10. PART 2 SELECTION AND APPLICATION OF CONTROL VALVES -- DEFINITION OF CONTROL VALVES -- HOW TO SPECIFY CONTROL VALVES -- FOR LIQUID SERVICE -- FOR GAS AND STEAM SERVICE -- B. Part B: GENERIC DESIGN CONSIDERATIONS -- B1. HIERARCHY OF DESIGN DOCUMENTS -- PROJECT EVOLUTION -- FIRST STAGE -- SECOND STAGE -- THIRD STAGE -- B2. DESIGN BASES -- DEFINITION OF THE TERM DESIGN BASES -- USE OF CODES AND STANDARDS IN PIPING SYSTEM DESIGN -- PIPING JOINTS -- LOADING CONDITIONS -- ENVIRONMENTAL FACTORS -- MATERIALS-RELATED CONSIDERATIONS -- THERMAL INSULATION -- SIZING OF A PIPING SYSTEM -- REFERENCES -- B3. PIPING LAYOUT -- CODES AND STANDARDS -- PIPING LAYOUT CONSIDERATIONS -- SPECIFIC SYSTEM CONSIDERATIONS -- APPLICATION OF COMPUTER-AIDED DESIGN TO PIPING LAYOUT -- REFERENCES -- FURTHER READING -- B4. STRESS ANALYSIS OF PIPING SYSTEMS -- FAILURE THEORIES, STRESS CATEGORIES, STRESS LIMITS, AND FATIGUE -- CLASSIFICATION OF LOADS, SERVICE LIMITS, AND CODE REQUIREMENTS -- STRESS INTENSIFICATION FACTORS (SIF) FOR NONSTANDARD FITTINGS -- LOCAL STRESSES -- ANALYSIS OF INTEGRAL WELDED ATTACHMENTS (IWA) -- TYPES OF PIPE LOADING CONDITIONS -- METHODS OF ANALYSIS -- PROCEDURES FOR THE DESIGN OF RESTRAINED UNDERGROUND PIPING -- REFERENCES -- B5. PIPING SUPPORTS -- INTRODUCTION -- DETERMINATION OF SUPPORT LOCATIONS -- DETERMINATION OF LOADS AND MOVEMENTS -- SELECTION OF PIPE-SUPPORTING DEVICES.

SUPPORT REQUIREMENTS FOR SPECIFIC PIPING MATERIALS -- DESIGN DETAIL CONSIDERATIONS -- OTHER PIPE SUPPORT CONSIDERATIONS -- B6. HEAT-TRACING OF PIPING SYSTEMS -- TYPES OF HEAT-TRACING SYSTEMS -- FLUID HEAT-TRACING -- ELECTRIC RESISTANCE HEAT-TRACING -- SKIN EFFECT TRACING -- IMPEDANCE HEAT-TRACING -- INDUCTION HEATING -- SELECTION CRITERIA FOR TRACING SYSTEMS -- AREA CLASSIFICATION -- ENVIRONMENTAL CONSIDERATIONS -- HEATER RELIABILITY AND CONSEQUENCE OF FAILURE -- TRACING OPTIONS FOR DIFFERENT TEMPERATURE RANGES -- AVAILABILITY OF STEAM AND ELECTRICITY -- INSTALLED AND OPERATING COSTS -- COMPUTER SELECTION PROGRAMS -- STEAM OR ELECTRIC TRACING: DESIGN CONSIDERATIONS -- ELECTRIC SYSTEM DESIGN -- REFERENCES -- B7. THERMAL INSULATION OF PIPING -- FUNDAMENTALS OF HEAT TRANSFER -- DESIGN PARAMETERS -- DESIGN CONDITIONS -- SERVICE CONSIDERATIONS -- MATERIALS -- ACCESSORY MATERIALS -- REFERENCES -- BIBLIOGRAPHY -- B8. FLOW OF FLUIDS -- INTRODUCTION -- THEORETICAL BACKGROUND -- STEADY SINGLE-PHASE INCOMPRESSIBLE FLOW IN PIPING -- STEADY SINGLE-PHASE COMPRESSIBLE FLOW IN PIPING -- SINGLE-PHASE FLOW IN NOZZLES, VENTURI TUBES, AND ORIFICES -- STEADY TWO-PHASE FLOW -- TRANSIENT FLOW ANALYSIS -- REFERENCES -- B9. CEMENT MORTAR AND CONCRETE LININGS FOR PIPE -- INTRODUCTION -- CONCRETE PRESSURE PIPE AND FITTINGS -- DUCTILE IRON PIPE AND FITTINGS -- STEEL PIPE AND FITTINGS -- MISCELLANEOUS CONSIDERATIONS -- BIBLIOGRAPHY -- B10. FUSION-BONDED EPOXY INTERNAL LININGS AND EXTERNAL COATINGS FOR PIPELINE CORROSION PROTECTION -- INTRODUCTION -- BACKGROUND, HISTORY, AND ADVANTAGES OF FBE LININGS AND COATINGS -- TERMINOLOGY -- TYPES OF ORGANIC PIPELINE PROTECTION LININGS AND COATINGS -- FBE CHEMISTRY -- CHOOSING A FUSION-BONDED EPOXY COATING OR LINING -- FBE APPLICATION PROCESSES -- QUALITY ASSURANCE -- JOINT SYSTEMS COATINGS AND LININGS -- HANDLING, SHIPPING, STORAGE, INSTALLATION, AND REPAIRS OF FBE LINED AND COATED PIPE AND FITTINGS -- REFERENCE CODES, STANDARDS, SPECIFICATIONS, AND REGULATIONS -- REFERENCES -- B11. RUBBER-LINED PIPING SYSTEMS -- INTRODUCTION -- PIPE FABRICATION REQUIREMENTS -- LINING GUIDELINES -- PROTECTING RUBBER-LINED PIPE -- ASSEMBLY, TESTING, INSPECTIONS, AND MAINTENANCE -- LINING SELECTION CONSIDERATIONS -- SUMMARY -- GLOSSARY -- B12. PLASTIC-LINED PIPING FOR CORROSION RESISTANCE -- INTRODUCTION -- METHODS OF MANUFACTURE -- LINER MATERIALS -- DESIGN CONSIDERATIONS -- INSTALLATION AND MAINTENANCE PRACTICES -- FLANGE REDUCTION TECHNIQUES -- APPLICABLE INDUSTRY STANDARDS -- PROJECT SPECIFICATIONS -- INSPECTION AND SERVICE LIFE ANALYSIS -- AUXILIARY PRODUCTS -- REFERENCES -- BIBLIOGRAPHY -- B13. DOUBLE CONTAINMENT PIPING SYSTEM DESIGN -- INTRODUCTION -- DOUBLE CONTAINMENT PIPING COMPONENTS -- LAYOUT OF DOUBLE CONTAINMENT PIPING SYSTEMS -- LEAK DETECTION METHODS AND REQUIREMENTS -- B14. PRESSURE AND LEAK TESTING -- PIPING CODES -- LEAK-TESTING METHODS -- SELECTION OF A TEST METHOD AND FLUID TEST MEDIUM -- PRESSURE TESTING PROCEDURES -- HYDROSTATIC TEST PLUGS -- HYDROSTATIC TEST PLUGS SUITED TO TESTING A SINGLE WELD -- FREEZE PLUGS -- C. Part C: PIPING SYSTEMS -- C1. WATER SYSTEMS PIPING -- INTRODUCTION -- HYDRAULIC AND ENERGY GRADE LINES -- REFERENCE DOCUMENTS -- DESIGN BASIS CONSIDERATIONS -- REFERENCES -- C2. FIRE PROTECTION SYSTEMS PIPING -- INTRODUCTION -- REFERENCE DOCUMENTS -- DESIGN CONSIDERATIONS -- C3. STEAM SYSTEMS PIPING -- INTRODUCTION -- REFERENCE DOCUMENTS -- DESIGN CONSIDERATIONS -- EXPERIENCE FEEDBACK -- REPAIRS, REPLACEMENTS, AND MODIFICATIONS -- REFERENCES -- BIBLIOGRAPHY -- C4. BUILDING SERVICES PIPING -- CONSTRUCTION CODES -- BASIC SYSTEMS.

PIPE DESIGN -- PIPE MATERIALS -- PIPE FITTINGS AND JOINTS -- MATERIAL SELECTION -- WELDING -- HANGERS AND SUPPORTS -- EXPANSION AND FLEXIBILITY -- TESTING -- PROBLEMS AND SOLUTIONS -- BIBLIOGRAPHY -- C5. OIL PIPELINE SYSTEMS -- INTRODUCTION -- LIQUID-PETROLEUM PIPELINE SYSTEMS -- HYDRAULIC DESIGN -- MECHANICAL DESIGN -- OPERATIONS AND MAINTENANCE DESIGN -- SYSTEM COST ANALYSIS22 -- SPECIAL OIL PIPELINE DESIGN TOPICS -- REFERENCES -- BIBLIOGRAPHY -- C6. GAS SYSTEMS PIPING -- INTRODUCTION -- REFERENCE DOCUMENTS -- DESIGN -- PIPE AND FITTINGS -- COMPRESSOR STATIONS -- OTHER FACILITIES -- CORROSION PROTECTION -- INSPECTION AND TESTING -- OPERATION AND MAINTENANCE -- DECOMMISSIONING/ABANDONMENT -- REFERENCES -- C7. PROCESS PIPING SYSTEMS -- INTRODUCTION -- REFERENCE CODES AND STANDARDS -- DESIGN CONDITIONS -- DESIGN LOADING CONSIDERATIONS -- PRESSURE DESIGN OF PIPING COMPONENTS -- SELECTION AND LIMITATIONS OF PIPING COMPONENTS -- GENERAL PROCESS PIPING SYSTEM CONSIDERATIONS -- SPECIAL DESIGN PIPING SYSTEMS -- SYSTEM LAYOUT CONSIDERATIONS -- CASE HISTORIES: CHALLENGES/SOLUTIONS -- REFERENCES -- C8. CRYOGENIC PIPING SYSTEMS -- INTRODUCTION -- ECONOMIC PARAMETERS OF CRYOGENIC FLUID DISTRIBUTION SYSTEMS -- PROPERTIES OF CRYOGENIC FLUIDS -- BIBLIOGRAPHY -- MATERIALS USED IN CRYOGENIC PIPING SYSTEMS -- FERROUS MATERIALS -- NONFERROUS ALLOYS -- NONMETALLIC MATERIALS -- JOINING -- ENVIRONMENTAL AND SAFETY CONCERNS -- REFERENCES -- BIBLIOGRAPHY -- PIPING SYSTEM DESIGN-FLUIDS -- PIPE SIZING CRITERIA -- TWO-PHASE FLOW -- OXYGEN GAS PIPING -- PIPING ARRANGEMENT -- REFERENCES -- PIPING SYSTEM DESIGN-MECHANICAL -- APPLICABLE CODES AND MATERIALS -- ECONOMIC PIPE SIZING -- PIPING COMPONENTS -- FLEXIBILITY ANALYSIS AND SUPPORTS FOR CYROGENIC PIPING SYSTEMS -- INSTALLATION OF PIPING COMPONENTS -- INSULATION SYSTEMS -- CLEANING -- VENTS -- REFERENCES -- COLD BOX PIPING -- DESIGN REQUIREMENTS FOR COLD BOX PIPING -- DESIGN REQUIREMENTS FOR SPECIAL SITUATIONS -- REFERENCES -- LIQUID STORAGE AND CONVERSION SYSTEMS -- LOW-PRESSURE BULK CONVERSION SYSTEMS -- HIGH-PRESSURE BULK CONVERSION SYSTEMS -- BULK LIQUID DELIVERY SYSTEMS -- MOBILE EQUIPMENT SYSTEM -- INTERNAL PIPING -- EXTERNAL PIPING -- ULTRA-HIGH-PURITY PIPING -- GENERAL GAS SUPPLY SYSTEM DESCRIPTION -- SYSTEM DESIGN AND FABRICATION REQUIREMENTS -- QUALITY ASSURANCE -- CHECKOUTAND START-UP -- C9. REFRIGERATION SYSTEMS PIPING -- REFRIGERATION CYCLES -- ALTERNATIVE REFRIGERANTS -- PRESSURE DROP IN REFRIGERATION PIPING -- MECHANICAL PIPING DESIGN -- REFERENCES -- C10. HAZARDOUS PIPING SYSTEMS -- INTRODUCTION -- TERMS USED IN THIS CHAPTER -- CODES, STANDARDS, AND REGULATIONS -- IDENTIFICATION OF HAZARDOUS PIPING.

QUALITY ASSURANCE AND QUALITY CONTROL -- DESIGN CONSIDERATIONS -- PRESSURE DESIGN -- JOINT DESIGN -- EXTERNAL LOADS DESIGN -- OPERATING MANUAL PREPARATION -- FABRICATION AND ERECTION -- EXAMINATION, INSPECTION, AND TESTING -- OPERATION AND MAINTENANCE -- MODIFICATIONS AND REPAIRS -- REFERENCES -- C11. SLURRY AND SLUDGE PIPING -- DEFINITION AND BACKGROUND -- SLURRY FLOW BEHAVIOR -- IN-PLANT SYSTEMS -- LONG-DISTANCE PIPELINES -- SLURRY CHARACTERISTICS -- SLURRY HYDRAULICS -- DESIGN FEATURES -- REFERENCES -- C12. WASTEWATER AND STORMWATER PIPING SYSTEMS -- DEFINITIONS -- UNITS AND ABBREVIATIONS -- QUANTITY OF FLOW -- QUANTITY OF STORMWATER FLOWS -- HYDRAULICS OF SEWERS -- UNIFORM-FLOW FORMULAS AND CALCULATIONS -- ASPECTS OF NONUNIFORM FLOW -- DESIGN ASPECTS OF SEWERS -- DESIGN EXAMPLES -- SEWER PIPE -- APPURTENANCES AND SPECIAL STRUCTURES -- OPERATION AND MAINTENANCE -- DISPOSAL OF WASTEWATER AND STORMWATER -- REFERENCES -- C13. PLUMBING PIPING SYSTEMS -- CODES AND STANDARDS -- FIXTURE UNITS -- PLUMBING FIXTURES -- EQUIVALENT LENGTH OF PIPING -- PIPING MATERIALS: GENERAL -- MISCELLANEOUS FITTINGS -- JOINTS -- JOINTS FOR PLASTIC PIPE -- SANITARY DRAINAGE SYSTEM PIPING -- SANITARY VENT SYSTEM PIPING -- INTERIOR STORMWATER DRAINAGE SYSTEM PIPING -- POTABLE WATER SUPPLY SYSTEMS AND PIPING -- SERVICE HOT WATER SYSTEM -- REFERENCES -- C14. ASH HANDLING PIPING SYSTEMS -- INTRODUCTION TO ASH HANDLING SYSTEMS -- TYPES OF SYSTEMS -- CODES AND STANDARDS -- DESIGN CRITERIA -- SYSTEM-SPECIFIC CONSIDERATIONS -- PIPING COMPONENTS AND MATERIALS FOR PIPE, FITTINGS, AND JOINTS -- PIPE -- FITTINGS -- VALVES -- COUPLINGS -- EXPANSION JOINTS -- PIPE SUPPORTS -- INSTRUMENTATION -- FABRICATION AND INSTALLATION CONSIDERATIONS -- EXAMINATION AND TESTING OF ASH HANDLING PIPING SYSTEMS -- OPERATION AND MAINTENANCE -- EXPERIENCE FEEDBACK-PROBLEMS AND SOLUTIONS -- C15. COMPRESSED AIR PIPING SYSTEMS -- INTRODUCTION -- GENERAL -- DEFINITIONS AND PRESSURE MEASUREMENTS -- PHYSICAL PROPERTIES OF AIR -- WATER VAPOR IN AIR -- IMPURITIES AND CONTAMINATION -- AIR COMPRESSORS -- AFTER COOLERS -- COMPRESSED AIR RECEIVERS -- COMPRESSED AIR DRYERS -- FILTERS AND SEPARATORS -- CONTAMINATION REMOVAL -- SILENCERS -- COMPRESSOR REGULATION -- STARTING UNLOADER -- PIPING NETWORK DESIGN -- DISCUSSION OF ITEMS IN THE DESIGN SEQUENCE -- PIPING SYSTEM DESIGN -- INSTRUMENT AIR -- BIBLIOGRAPHY -- C16. COMPRESSED GASES AND VACUUM SYSTEMS FOR LABORATORIES -- GENERAL -- CODES AND STANDARDS -- COMPRESSED GAS FUNDAMENTALS -- VACUUM FUNDAMENTALS -- CLASSIFICATION OF SPECIALTY COMPRESSED GASES -- GRADES OF SPECIALTY GASES -- STORAGE AND GENERATION OF GASES -- GAS DISTRIBUTION SYSTEM COMPONENTS -- DISTRIBUTION NETWORK -- LABORATORY VACUUM SYSTEM DESCRIPTION -- LABORATORY VACUUM SYSTEM CODES AND STANDARDS -- LABORATORY VACUUM SYSTEM COMPONENTS -- PIPING DISTRIBUTION NETWORK -- PIPING DISTRIBUTION NETWORK SIZING CRITERIA -- PIPING DISTRIBUTION NETWORK SIZING -- C17. FUEL GAS DISTRIBUTION PIPING SYSTEMS -- INTRODUCTION -- FUEL GAS DESCRIPTION -- CODES AND STANDARDS -- SYSTEM OPERATING PRESSURES -- NATURAL GAS -- MAJOR NATURAL GAS SYSTEM COMPONENTS -- SITE DISTRIBUTION -- SITE BUILDING SERVICE-SIZING PROCEDURE -- BUILDING INTERIOR PIPE-SIZING PROCEDURE -- PIPE AND SYSTEM MATERIALS -- SYSTEM TESTING AND PURGING -- LIQUEFIED PETROLEUM GAS (LPG) -- LPG STORAGE TANKS -- LPG EQUIPMENT ON THE SITE -- LPG SYSTEM DESIGN -- LPG SYSTEM TESTING AND PURGING.

D. Part D: NONMETALLIC PIPING -- D1. THERMOPLASTICS PIPING -- SCOPE -- INTRODUCTION -- THERMOPLASTIC PIPING MATERIALS -- JOINING METHODS -- DIMENSIONING SYSTEMS -- PHYSICAL AND MECHANICAL PROPERTIES -- CHEMICAL RESISTANCE -- DESIGN AND INSTALLATION -- COMMON DESIGN AND INSTALLATION CONSIDERATIONS -- CONSIDERATIONS FOR ABOVEGROUND USES -- CONSIDERATIONS FOR BELOWGROUND USES -- INSTALLATION -- SOURCES OFADDITIONAL INFORMATION -- REFERENCES -- D2. FIBERGLASS PIPING SYSTEMS -- TYPICAL APPLICATIONS -- STANDARDS -- RESINS -- MANUFACTURING PROCESSES -- JOINING SYSTEMS -- RESISTANT PROPERTIES -- PHYSICAL PROPERTIES -- BENEFITS AND LIMITATIONS OF FIBERGLASS PIPING SYSTEMS -- PRESSURE RATINGS -- ABOVEGROUND DESIGN -- BELOWGROUND DESIGN -- CONNECTION TO OTHER EQUIPMENT AND PIPING MATERIAL -- INSULATION AND HEAT TRACING -- PAINTING FIBERGLASS PIPING -- HYDROSTATIC TESTING -- AIR TESTING -- GLOSSARY -- REFERENCES -- E. Part E: APPENDIXES -- E1. CONVERSION TABLES -- E2. PIPE PROPERTIES -- E3. TUBE PROPERTIES -- E3M. TUBE PROPERTIES (METRIC) FOR COPPER TUBE -- E4. FRICTION LOSS FOR WATER IN FEET PER 100 FT OF PIPE -- E4M. FRICTION LOSS FOR WATER IN METERS PER 100 METERS OF PIPE -- E5. PIPE, TUBE, AND FITTING MATERIAL SPECIFICATIONS ACCEPTABLE FOR ASME B31, PRESSURE PIPING CODE, AND ASME BOILER AND PRESSURE VESSEL CODE -- E6. INTERNATIONAL PIPING MATERIAL SPECIFICATIONS -- E7. MISCELLANEOUS FLUIDS AND THEIR PROPERTIES -- E8. MISCELLANEOUS MATERIALS AND THEIR PROPERTIES -- E9. PIPING-RELATED COMPUTER PROGRAMS AND THEIR CAPABILITIES -- E10. INTERNATIONAL STANDARDS AND SPECIFICATIONS.

Also issued in print.

Description based on cover image and table of contents, viewed on April 28, 2007.


Fundación Universitaria del Área Andina
Sede Principal Bogotá: Cra 14A No.70A-34. Sede Administrativa Bogotá: Calle 71 No.13-21. PBX.: (57+1) 7424218. (57+1) 7423931. EXT. 1208, 1206, 1205.
Seccional Pereira: Calle 24 No. 8-55. PBX.: (57+6) 3255992. Sede Medellín: Calle 34A No. 77-08, Barrio Laureles. PBX.: (57+4) 2505651 - (57+4) 2503401
Sede Valledupar: Transv. 22 Bis No. 4-105, Av. Circunvalar - Sector Callejas. PBX.: (57+5) 5894093
Línea de atención al aspirante en Bogotá: (57+1) 7449191. Línea gratuita nacional: 018000 180099